47
California Energy Commission(CEC)/Canada Battery
Charger(NRCAN) Battery Charging Testing
It is not necessary to activate testing mode during normal usage, unless you
want to charge the battery only and disable all telephone functions.
To activate the battery charge testing mode:
1. Ensure handset and base are powered and in range.
2. Press M, and enter *2201 to enter
Test Mode
.
3. Select
Test Base
and press M.
4. Scroll i to
CEC Mode
and press M to confirm.
5. Press n.
To deactivate/exit the battery charge testing mode.
1. Unplug the base power, reconnect the base power.
2. Remove the handset battery, then insert the battery into the handset to
power up the handset.
3. After Handset link to base, it is back to normal mode.Note
If you do not press any button on the handset for 30 seconds the display will
automatically return to standby. It will also return to standby when the handset
is placed on the base or charger cradle.
General information
To Next Page
Loading...
Need help?
General
