5
English
Select Menu
Your radio navigates through the Select Menu as follows:
Voice Operated Transmission (VOX)
Transmission is initiated by speaking into the microphone of
radio or headset (headset is not included) instead of the
pushing the PTT button.
To select the VOX level:
1. Press SEL/ to enter Select Menu. Advance until
blinks.
2. Press or to the desired VOX sensitivity level.
3. Press Exit to exit the Select Menu.
Note: Level oF(OFF) disables VOX. Levels 1-5 set the
sensitivity of the VOX circuit.Use level 1 in quiet
environments, and use level 5 in very noisy
environments. You can find the appropriate
sensitivity level by speaking into the microphone. If
flashes, your voice is accepted.
Transmitting a Call Tone
Your radio is equipped with five selectable call tones.
To select a call tone:
1. Press SEL/ to enter Select Menu. Advance until
blinks.
2. Press or to the desired call tone.
3. Press Exit to exit the Select Menu.
To transmit the selected call tone :
1. Press to transmit the selected call tone. The selected
tone will automatically be transmitted for a fixed length of
time.
2. PTT to cancel Call Tone.
Auto Power Off
Auto Power Off feature allows you to set the time that the radio
turns off automatically.
1. Press SEL/ to enter Select Menu. Advance until and
the current Auto Power Off time blinks.
2. Press or to select the time from oF (Off), 60, 120 and
180 minutes.
3. Press Exit to exit Menu.
Normal
Channel Sub-code VOX Level Call Tone
Auto Power
Off
Normal
1–8 0–121 OFF, 1–5 1–5
Off/60/
120/180
68015000925_a.book Page 5 Friday, February 24, 2017 10:30 AM
To Next Page
Loading...
