English
6
Mode Menu
Your radio navigates through Mode Menu as follows:
Features on Your Radio
Channel Scan Mode
Enables your radio to scan for active channels. When activity is
detected, your radio lands (stays) on that channel
(for 2 seconds). To transmit on that channel, press the PTT
button. When activity on the landed channel ends, your radio
continues scanning other channels.
To turn the channel scan ON:
1. MENU/ to enter Mode Menu. Advance until blinks.
2. SEL/ to turn ON channel scan.
3. MENU/ , or PTT to turn OFF Scan mode.
Dual Watch Mode
Enables your to scan the current channel and another channel
alternately.
To set another channel and start Dual Watch:
1. MENU/ to enter Mode Menu. Advance until blinks.
2. or to select the channel, then press SEL/ .
3. or to select the Sub-code, then press SEL/ .
4. The radio starts to Dual Watch.
Note: If you set the same channel and Sub-code as the
current channel, Dual Watch doesn’t work.
5. MENU/ to turn the Dual Watch mode OFF.
Select the
Sensitivity
Normal
Scan Mode
Dual Watch
Mode
Room Monitor
Mode
Up Timer
Mode
Select the Channel
and Sub-Code
Normal
Up Timer
Mode
Room Monitor
Mode
Dual Watch
Mode
Scan Mode
68015000924.fm Page 6 Tuesday, May 24, 2016 4:50 PM
To Next Page
Loading...
