6 Pair & connect
Pair & connect a second phone
1 Turn off the first phone and any other Bluetooth
devices previously paired with your speakerphone.
2 Turn your speakerphone off.
3 Turn on the Bluetooth feature on your phone.
4 Turn on your speakerphone.
The status light becomes steady in blue and you
hear “ready to pair”.
5 Follow the voice prompts to connect your phone to
your speakerphone.
Note: If prompted for the passkey, enter 0000.
When your speakerphone successfully pairs with
your phone, the status light flashes in blue and
purple and you hear “phone 2 connected”.
To connect both phones, turn them on and then turn
your speakerphone off and on. When you hear “phone
1 connected”, and “phone 2 connected”, your
speakerphone is ready to go.
Test your connection
1 Make sure your speakerphone is on.
2 On your phone, dial a phone number and press the
Call/Send key.
You hear ringing on the speakerphone when
successful.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
