Motorola XU2100

XSeries Programming Quick Reference
Function Appearance
Press & hold
M
Qfor 3 sec. and turn on radio. k displays.
*Channel
Use [ or ] for 1 through 6.
Frequency
Press
\ until l displays. To
change, press
[ or ] .
*depending upon model
*depending upon model
Interference
Eliminator
Code
Appears after
l shows. Set
for each channel.
*Scramble
Code
Press \ until e displays. Must
be set to same code for all radios.
Bandwidth
Press \ until K displays. Press
[
or
]
to select D (25.0 kHz)
or C (12.5 kHz).
Note: If bandwidth is not flashing,
it is not selectable on the
chosen frequency.
2
1
e
K
C
XSeries Programming Quick Reference
Radio On Visual \as needed, then [ or ]
*Available
Channels
Press \ until = displays.
Press
[
or
]
to select number of
available channels.
Call Tone
Choose1, 2, 3, or
0 = Off (default).
Microphone
Gain
Choose:
1 Low Sensitivity
2 Medium Sensitivity
3 High Sensitivity
*Scan List
Press
[
or
]
to select channel,
then choose Y (yes) to include or
n (no) to exclude by pressing
J
.
*depending upon model
6
=
E
?
Y