Need help?Do you have a question about the Motorola XT220 and is the answer not in the manual?
General| Number of Channels | 22 |
|---|---|
| Privacy Codes | 121 |
| Waterproof | No |
| Weatherproof | Yes |
| NOAA Weather Scan | Yes |
| VOX | Yes |
| Channels | 22 |
| Maximum Range | 25 miles |
| Power Source | Rechargeable Battery |
Read operating instructions and RF energy awareness information contained in the Product Safety and RF Exposure booklet.
Contains important safety and operating instructions for batteries and chargers.
Provides guidelines for the safe operation of the radio and its accessories.
Identifies and describes the physical components of the XT220 two-way radio, including knobs, buttons, and indicators.
Details about Li-Ion battery life, factors affecting it, and charging considerations.
Step-by-step instructions for attaching and detaching the Li-Ion battery to the radio.
Procedure for safely removing the Li-Ion battery from the radio.
Information about the radio's charger and power supply unit.
Instructions for using and attaching the radio to the holster.
Procedure for charging the radio using the drop-in tray single unit charger.
Instructions for charging the battery separately without the radio.
Explains the meaning of different LED status indicators on the charger.
Provides estimated charging times for the standard battery with the charger.
Instructions for charging radios and batteries using the Multi Unit Charger (MUC).
Explains the meaning of different LED status indicators on the Multi Unit Charger.
How to power the radio on and off using the On/Off/Volume Knob.
Instructions on how to increase or decrease the radio's volume.
How to change channels using the Channel Selector Knob.
Guidance on monitoring channels and talking to others.
Information on factors affecting radio transmission range and optimal conditions.
How to receive calls and respond using the PTT button.
Explanation of channel, frequency, and interference codes for communication.
How to reset all radio features to their original factory default settings.
How to use VOX with compatible accessories and adjust sensitivity.
Information on enabling/disabling iVOX via CPS.
Adjusting the sensitivity of the radio's accessory or microphone for VOX operation.
Using CPS software and cable to program radio features.
Allows choosing frequencies from a pre-defined list.
Using Interference Eliminator Codes to minimize interference.
How to monitor other channels and the LED indicator for scan status.
Temporarily removing channels from the Scan List.
Sets the maximum continuous transmission time before automatic termination.
Eliminates unwanted noise during loss of carrier detection.
Checks channel activity before transmission to prevent interruptions.
Methods for cloning XT 220 radio profiles using MUC, SUC, or CPS.
Step-by-step guide for cloning radios using the Multi Unit Charger.
Procedure for cloning radios using a Radio-to-Radio cloning cable.
How to clone radios using the Computer Programming Software (CPS).
To Next Page