17
BATTERIES AND CHARGERS
Multi Unit Charger LED Indicators
(*) Normally re-positioning the battery pack will correct this issue
(**) Battery temperature is too warm or too cold or wrong power voltage is being used.
If there is NO LED indication:
1. Check if the radio with battery, or the battery alone, is inserted correctly. (refer to “Charging a Radio and
Battery using a Multi Unit-Charger - MUC (Optional Accessory)” on page 16)
2. Ensure that the power supply cable is securely plugged into the charger socket using an appropriate AC
outlet and there is power to the outlet.
3. Confirm that the battery being used with the radio is listed in “Battery” on page 44.
Table 4: Charger LED Indicator
Status LED Status Comments
Power On Green for approx. 1 sec
Charging Steady red
Charge Complete Steady green
Battery Fault (*)
Red fast flash
Waiting to charge (**)
Amber slow flash
Battery Level Status
Flash red 1 time
Battery low
Flash amber 2 times
Battery medium
Flash green 3 times
Battery high
To Next Page
Loading...
