28
PROGRAMMABLE FEATURES
simultaneously for 3 to 5 seconds while
turning the radio ON.
• The radio LED Indicator shows two
orange heartbeats when in Cloning
Mode.
3. Place the Source radio in the source pocket that
pairs with the target pocket you chose in step 1.
Short press SB1 button on Source radio.
4. While cloning is in progress, radio LED Indicator
shows solid orange, then back to two orange
heartbeats when cloning is completed. Radio
LED Indicator shows a sequence of one green
blink, one orange blink, one green blink
repeatedly if cloning failed.
5. Once you have completed the cloning process,
turn the radios OFF and ON to exit the ‘cloning’
mode.
Further details on how to clone radios are
explained in the Instructions Sheet provided
with the MUC.
When ordering the MUC, refer to P/N#
PMLN6385_.
Notes:
• If cloning fails, refer to “What To Do If Cloning
Fails” on page 31.
• Paired Target radios and Source radios must be
of the same band type in order for the cloning to
run successfully.
• MUC pockets numbers should be read from left to
right with the Motorola Solutions logo facing front.
To Next Page
Loading...
