ASSEMBLING THE ELECTRIC TRI SCOOTER
1.Unpack the Scooter carefully so that you do not misplace any of the parts.
2.Place the Scooter on a flat, level surface.Using any household item, raise the
front base of the scooter up at least4 so you can easily connect the frame/front
wheel to the base.
3.Remove the bolts and nuts from the connecting tubu clamp.Place the connecting
tube into the top opening.After aligning the hole,place the two bolts through the
connecting tube and neck assembly. Twist the bolts,do not hammer them through.
Tighten these two bolts with the nuts provided.
To Next Page
Loading...