MotoTec Drifter - Riding Safety and Parking; Folding the Tri Scooter; Folding Procedure

to the “ ON”position.The battery gauge will illuminate
indicating that the battery is in operation.
Hold onto the handlebars with both hands.Your left fingers
will control the byakes and your right thumb will control the
thumb throttle .As you depress the throttle lever with your
thumb the speed will increase.Release the thumb throttle and
apply the brake to stop the scooter.You will control the speed
of the scooter by using both the throttle and the brake.When
the brake handle is squeezed it cuts power to the throttle.
NOTE 1:You may use the balancing wheel(the smaller rear
wheel) to balance the scooter when you want to ride with the
front wheel raised.
WARNING:Never try stunts beyond the control of your
skills.Never ride too fast for your skills or condition.
NOTE 2:When scooter is parked, press the power switch button, to the
“OFF”position;this will avoid anyone from accidentally pushing the throttle causing
the scooter to speed forward, Failure to do this could lead to an accident.
FOLDING THE TRI SCOOTER
1.Unplug the power connecting plugs.
2.Unscrew the bolts and nuts from the connecting tube clamp using the enclosed
allen wrenches.
3.Life the connecting tube(which is also attachment to the handlebar tube).
4.Carefully place the handlebar tube on the footrest frame.
5.Finger screw the bolts an nuts back to the connecting tube clamp to avoid any
misplacement.