MotoTote MTX Series User Manual

Revised 05/16/2015 Page 1 of 4
Four high quality
tie-down straps
Additional items you will need
One 5/8” wrench or socket
One 11/16” wrench or socket
Instructions for
MotoTote MTX carriers:
Intended Use and Limitations
Accessory Pack Contents
Check the accessory pack for these items: Note that some of the items may already be installed on the MotoTote
1 ea 4 ea 8-12 ea
4 medium
3 long
Lynch
pin
1 ea
1 ea
1 ea
End caps Bolts Nuts Washers Lanyard Hex wrench
Ramp keeper tab
...the tongue weight capacity of your vehicle OR 10% of vehicle’s total towing
capacity. This info is in the vehicle user’s manual or the manufacturer’s website.
Note: The vehicle must have a class III or better hitch receiver AND the vehicle
must be rated to support the total weight of the bike + MotoTote.
PLEASE READ THESE INSTRUCTIONS CAREFULLY!
The MotoTote is a hitch-mounted carrier for transporting motorcycles. Do not use it for any other
purpose.
Do not exceed product limitations or deviate from these instructions
1 short
and
MTXS MTX3
Bike
MTXS MAX=600 lbs/272 kg
MTX3 MAX = 500 lbs/227 kg
+
MotoTote
60 lbs/27 kg
=
TOTAL
CANNOT EXCEED
5 locking
2 flange
Additionally, the Zero Wobble Bolt Kit includes on long bolt, one flange nut, and one flat washer
1 lock
5 flat
Maximum weight capacities for MotoTote carriers manufactured before May 2015 are as follows:
MTXS = 550 lbs./250 kg.
MTX3 = 450 lbs./205 kg.

MotoTote MTX Series Specifications

General

Brand	MotoTote
Model	MTX Series
Category	Automobile Accessories
Language	English

Summary

MotoTote MTX Carrier Instructions

Intended Use and Limitations

Outlines the product's purpose, usage restrictions, and weight capacities.

Pre-Assembly Requirements

Lists additional tools and accessory pack contents needed before installation.

MTX Platform and Carrier Assembly

MTX Platform Attachment

Details how to bolt the MTX platform to the receiver tube for both models.

Sport Model Assembly

Specific steps for attaching arms and stops for the Sport version.

M3 Model Assembly

Specific steps for attaching arms and stops for the M3 version.

Attaching Carrier to Vehicle and Loading Bike

Vehicle Hitch Attachment

Instructions for securing the MotoTote receiver tube to the vehicle's hitch.

Loading and Securing the Bike

Guides on loading the motorcycle and using tie-downs for secure transport.

Operation and Maintenance

Ramp Stowing and Usage Tips

Information on how to stow the loading ramp and general operating advice.

Important Dos and Don'ts

Key recommendations and warnings for safe and proper use of the MotoTote.

Warranty Information

One Year Limited Warranty

Details the warranty coverage and claims process.