control – motion – interface
motrona GmbH
Zwischen den Wegen 32
78239 Rielasingen - Germany
Tel. +49 (0)7731-9332-0
Fax +49 (0)7731-9332-30
info@motrona.com
www.motrona.com
GV15502B_e.DOC / Mrz-08 Page 1 / 9
GV155, GV156
Electronic Cross Switchers for Encoder Signals
and Analogue Signals
• 2 x 2 Cross matrix switch for encoders RS422 (A, /A, B, /B, Z, /Z) or HTL 15-30V
• 2 x 2 Cross matrix switch for analogue signals +/- 10V
• Cascadable inputs and outputs
• Bounce-free electronic switching of all channels
• PLC compatible control inputs for source-to-target selection, signals inversion, line
inhibit and for/rev selection
• Closed 19“ aluminum housing, 14TE wide and 3HE high.
Front connection via standard Sub-D-connectors
• Supply range 18...30VDC
• Also suitable for DIN rail mounting with option “SM150”
Operating Instructions
To Next Page
General