Need help?Do you have a question about the MOTU 828mk3 and is the answer not in the manual?
General| Audio Interface Type | FireWire/USB |
|---|---|
| Number of Mic Preamps | 2 |
| A/D Resolution | 24-bit |
| Total Inputs | 28 |
| Total Outputs | 30 |
| MIDI I/O | Yes |
| Phantom Power | Yes |
| Simultaneous I/O | 28 x 30 |
| Word Clock I/O | Yes |
| Type | Audio Interface |
| Input Channels | 28 |
| Output Channels | 30 |
| Sample Rate | 192kHz |
| Bit Depth | 24-bit |
| Dimensions | 19 x 7 x 1.75 inches |
| Weight | 5.5 lbs |
| Digital Inputs | ADAT, S/PDIF |
| Digital Outputs | ADAT, S/PDIF |
| Mic Preamps | 2 |
| Analog Outputs | 8 x TRS |
| Computer Connectivity | USB |
| Connectivity | USB |
| Headphone Outputs | 2 |
| Analog Inputs | 8 x 1/4" TRS line inputs (2 are shared with mic inputs) |
Details the various audio and digital I/O connectors on the 828mk3's rear panel.
Describes the physical layout and controls of the 828mk3's front panel.
Explains the on-board digital mixer and effects processing capabilities.
Guides users on connecting the 828mk3 hardware to their computer via FireWire.
Explains how to establish synchronization between the 828mk3 and other digital audio devices.
Details the process of synchronizing the 828mk3 directly with SMPTE time code.
Details how to set the digital audio clock source for synchronization and proper operation.
Describes methods for monitoring live audio input with minimal delay.
Explains how to adjust buffer settings to manage monitoring latency and CPU load.
Guides users on setting up and using the SMPTE Console for time code synchronization.
To Next Page
