Need help?Do you have a question about the MOTU 896mk3 and is the answer not in the manual?
General| Type | Audio Interface |
|---|---|
| Connectivity | FireWire, USB 2.0 |
| Sample Rates | 44.1, 48, 88.2, 96, 176.4, 192 kHz |
| Bit Depth | 24-bit |
| Phantom Power | Yes |
| Analog Inputs | 8 x XLR/TRS Combo |
| Analog Outputs | 8 x TRS |
| Digital Inputs | 2 x ADAT, 1 x S/PDIF Coax |
| Digital Outputs | 2 x ADAT, 1 x S/PDIF Coax |
| MIDI I/O | 1 x In, 1 x Out |
| Word Clock I/O | 1 x In, 1 x Out |
| Software | CueMix FX |
Details operating conditions and electrical safety measures.
Set the desired sample rate for recording and playback.
Determines the digital audio clock the 896mk3 will follow.
Choose what audio is heard from the headphone jack.
General introduction to the 896mk3's features and capabilities.
Description of connectors and ports on the rear of the unit.
Overview of the 896mk3's front panel controls and display.
Details on the 896mk3's built-in digital mixer and processing capabilities.
Items included in the 896mk3 box.
Minimum hardware and software specifications for Mac.
Summary of the hardware installation process.
Steps for connecting the 896mk3 to a computer via FireWire.
How to make analog and optical audio connections.
Procedures for synchronizing the 896mk3 with other devices.
Introduction to installing the 896mk3 software components.
Step-by-step instructions for installing drivers and applications.
Explanation of how the CoreAudio driver enables Mac OS X compatibility.
Introduction to the MOTU Audio Setup utility.
Methods for accessing and configuring 896mk3 hardware settings.
Configuration options specific to the 896mk3 interface.
Introduction to front panel controls and programming.
Description of controls for analog inputs like trim, pad, phantom power.
Introduction to using the 896mk3 with Digital Performer.
Steps for configuring Digital Performer with the 896mk3.
Specific settings for the 896mk3 relevant to Digital Performer.
Introduction to using the 896mk3 with AudioDesk.
Steps for configuring AudioDesk with the 896mk3.
Specific settings for the 896mk3 relevant to AudioDesk.
Using the 896mk3 with various Mac OS X audio applications.
Instructions for installing drivers for Mac OS X compatibility.
How to launch and configure the 896mk3 via MOTU Audio Setup.
Explanation of monitoring latency and its causes.
Methods for monitoring live audio signals with the 896mk3.
How buffer size impacts latency and system performance.
Using CueMix FX for zero-latency monitoring.
Introduction to the CueMix FX software mixer.
Description of the 16-bus mixer with EQ, compression, and reverb.
Fundamental concepts of navigating and using the CueMix FX mixer.
Understanding the Mixes, Inputs, Outputs, and Channel Settings tabs.
Introduction to SMPTE time code synchronization features.
Using the SMPTE Setup software for time code management.
Configuring clock source, address, and frame rate for SMPTE sync.
Settings for reading and generating SMPTE time code.
Diagnosing problems with time code sync and software visibility.
Troubleshooting clicks, pops, and drive-related audio issues.
Resolving issues with input monitoring and latency.
Information on how to contact MOTU for technical assistance.
To Next Page
