Switching Push-assist Mode On/Off
To activate the push-assist function, keep holding down button. After 2 seconds , E-bike is
activated to go at a uniform speed of less than 6 Km/h while the screen displays .
The push-assist function is switched off as soon as you release the down button. The E-
bike system stop the power output immediately.
Push-assist function may only be used when pushing the E-bike. Be aware of danger of
injury when bike wheels do not have ground contact while using the push-assist function.
Display Interface
After switching on the E-bike system, the display will show Current Speed, ODO by
default, Trip Distance, Trip time and TO GO.
Press the “ON/OFF” button will switch between:
Current Speed (km/h) → ODO(km) →Trip Distance(km) → Trip time (h:m) → TO GO (h)
To Next Page
Loading...