USB Charging (not available from MY 2024)
When power on, press and hold UP button, DOWN button and M button simultaneously
to enter into the charging mode. When no charging device, or complete charging, the
display will exit USB charging mode automatically.
Trip date set (MY 2023)
To reset the trip data to zero, press and hold the 'M' and '-' buttons simultaneously in the
handlebar menu. This should reset the trip data on your display.
Trip date set (MY 2024)
When the speed is 0, press and hold the UP and DOWN buttons to enter the basic
settings.
Reset TRIP Counter
tc-1: Resets the TRIP counter.
tc-0: Does not reset the TRIP counter.
Select the desired option and confirm to save the configuration and exit the menu.
Switching the E-bike System On/Off
Hold the ON/OFF button for 2s to switch on display( E-bike system) and provide the
owner supply for the controller. Likewise, hold the ON/OFF button for 2s again, the E-
bike system will be switched off .The E-bike system no longer uses the battery power.
When the E-bike system is switched off, the leakage current is less than 1 μA.
When no use of bike for over 10 minutes, display switches off automatically.
The images contained in these instructions have symbolic value only. The illustration and
product may differ in detail. The instructions must be implemented accordingly. Visual
deviations are not a reason for non-compliance with the warranty/guarantee guidelines
and are not considered a reason for a complaint
To Previous Page
Loading...