Moukey MBRT1 Bluetooth 5.0 Audio Transmitter and Receiver
Owner’s Manual
Precautions
Read Carefully Before Proceeding
Please keep this manual in a convenient place for future reference
Power Supply
Please connect the original USB cable to the USB charger, make sure the charger is DC
5V, 1A above current.
Connections
Always turn off the power before connecting or disconnecting. This will help prevent
malfunction and damages.
Environment Considerations
Avoid using the unit in any of the following conditions that could cause malfunction:
●Extremely hot or cold places
●Under direct sunlight
●Magnetic fields
●Near heaters and other heat sources
●Sandy or dusty places
●Places that are extremely humid or exposed to splashing water
●Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to interference or that emits powerful electromagnetic
waves (e.g. radios and TVs) should not be placed near this unit, as interference could
occur. Electromagnetic interference could cause malfunction and could corrupt or destroy
data.
Always operate this unit at a suitable distance from these devices
Handling
Do not apply excessive force to the switches and other controls, exposing the unit to
strong impacts, which could cause it to break.
Do not put foreign objects or liquids into the unit.
Never open the case or attempt to modify the product in any way since this can result in
damage to the unit. Clean only with a soft, dry cloth.
Manufacturer: Guangzhou Rantion Technology Co., Ltd
To Next Page
General