3. Press the Power button to turn on MBRT1.
4. Select the correct audio output mode (RCA/ Coaxial / SPDI/F /AUX) by pressing the
Mode button (Very Important).
5. Press RX/TX switch to the "RX" position.
6. Pairing - Pair MBRT1 with your Bluetooth-enabled Mobile phone,PC etc.
• Active Bluetooth on your phone or another device to find “Moukey MBRT1” to
connect.
• Wait and connected (For quick pairing, better keep them within 1 meter when
pairing).
RCA/ Coaxial /
SPDI/F /AUX
3
Select the correct audio input mode
(RCA/ Coaxial / SPDI/F /AUX)
Press RX/TX switch to the RX position
To Next Page
Loading...