pushing it inside the motor unit (a) via the opening located at the rear (a4).
- Unplug the appliance.
- For easier cleaning, rinse the accessories immediately after use.
- Wash and dry the accessories: you can clean them all in the dishwasher, in
water, or under the tap, except for the mincer head assembly
(j+k3+k6+k7+k8) and the motor unit (a), which should be wiped with a
damp sponge.
- Once you have dried them, wipe the 4-blade cutter (k6) and the grilles (k7)
with vegetable oil to avoid them rusting.
- Pour hot water with a few drops of washing up liquid into the blender jug
(h3). Close the lid (h2) with the measuring cap (h1) and Pulse briefly.
Unplug the appliance and rinse the jug.
- The accessory blades are extremely sharp. Handle them with care.
Tip: If the accessories become discoloured by foods (carrots, oranges, etc.),
rub them with a cloth dipped in vegetable oil and then wash them as normal.
Avoid storing your food processor in a damp environment.
If your appliance malfunctions, check that
- Your appliance is plugged in correctly.
- The accessories are fitted correctly.
Your appliance still isn’t working? Consult an approved service centre (see list
in the service booklet).
CLEANING
STORAGE
PROCEDURES IN THE EVENT OF MALFUNCTION
DISPOSAL OF PACKAGING MATERIALS AND THE APPLIANCE
All the packaging materials used are safe for the
environment and may be disposed of in accordance with
the recycling regulations in force. For the disposal of the
appliance, please consult the relevant authorities in your
local area.
30
To Next Page
Loading...
Need help?
General
