11
Setting the Desk Legs to the Same Height
Before attaching the transmission rod, measure the heights of the left and middle desk legs to see
if they are set at the same level. If not, insert the transmission rod into the hole in the left leg.
Turn the rod to adjust the left leg so it's level with the middle leg. Turn the rod anti-clockwise to
lower the left leg or clockwise to raise it.
Attaching the Transmission Rod
Step 4
Loosen the coupling nut.
Coupling nut
Turn clockwiseTurn clockwise
1-1 1-2
Turn
anti-clockwise
Turn
anti-clockwise
R
1
To Next Page
Loading...