Important InformatIon for Double anD
trIple StrollerS
If you have a double or triple stroller you will need to
remove the centre metal bars of the frame to release the
domed fabric. You may then need to reattach the metal bars
without the fabric, depending on whether you are attaching
a Double or a Twin Carrycot. See chart below.
NOTE: Urban Double strollers from 2008 onward have a
wider opening at the top of the bars to allow the domes to
be threaded through easily. If you have a stroller of this type,
the bars only need to be removed if a twin carrycot is being added.
How to remove the centre bar(s)
1. Terrain only: undo seat base nut with a spanner at
point F and remove hinge pin from seat base.
2. Urban and Terrain models: unfasten wing nut at
point G and remove centre bar at both ends (points
G and H).
Double Stroller Frame Triple Stroller Frame
Twin
Carrycot
No centre bar No centre bar on side attaching Twin
Carrycot. Centre bar remains on side not
accommodating Twin Carrycot.
Double
Carrycot
Centre bar required.
Remove hammock fabric
from seat you wish to
replace with Carrycot.
Centre bar required.
Remove hammock fabric from seat you
wish to replace with Carrycot. Double
Carrycot can only be tted to outside
seat positions.
Preparing your stroller (continued)
Centre bar
� � �
Centre bar
Seat base
Heel
rest
H
F
G
To Next Page
Loading...
