Mountfield Azuro BP-120HS-A User Manual

3EXX0689-3EXB0603-3EXB0604-3EXB0605-3EXB0606
EN INSTRUCTIONS FOR USE AND MAINTENANCE
BP-50HS-A
BP-85HS-A
BP-100HS-A
BP-120HS-A
BP-140HS-A
CZ-09/2021-No.:710-C
The illustrations shown in this manual may not always correspond to a specic design;
their purpose is to help better understand the text.
The manufacturer and supplier reserve the right to make changes to the product
without obligation update this Installation and Operation Guide.
INSTALLATION & INSTRUCTION
MANUAL FOR
HEAT PUMP
WITH WIFI MODULE

Mountfield Azuro BP-120HS-A Specifications

General

Model	Azuro BP-120HS-A
Category	Heat Pump
Heating Capacity	12 kW
Refrigerant	R32
Noise Level	52 dB

Summary

Safety Instructions

General Safety Guidelines

Provides critical safety warnings and guidelines for operating and maintaining the heat pump.

Heat Pump Installation and Connection

Site Selection

Guidelines for choosing an appropriate outdoor location for the heat pump installation.

Heat Pump Installation Procedures

Electrical Connection

Connection to the Mains

Instructions for connecting the heat pump to the main power supply, including safety requirements.

Permanent Electrical Connection

Guidance for permanently wiring the heat pump, emphasizing professional installation.

Control Unit Overview

LED Control Panel Functions

Heat Pump Switching and Parameter Setting

Operational Parameter Setting and Checking

Details on how to set and check various operational parameters of the heat pump.

Control Panel Locking and Operation

Operating Instructions

Essential instructions for operating the heat pump correctly and safely.

Adjustment Using Bypass

How to adjust the bypass valves for optimal heat pump operation and flow rate.

Maintenance and Wintering

Maintenance

Routine maintenance tasks and cleaning procedures for the heat pump.

Wintering

Instructions for preparing the heat pump for winter storage to prevent frost damage.

Troubleshooting and Error Messages

WiFi Module: Boost CORE

App Installation

Steps to download and install the 'Boost CORE' mobile application for Wi-Fi control.

App Registration and Login

Pairing the Heat Pump to the App

Wi-Fi Pairing Configuration

Wi-Fi Configuration for Pairing

Guidance on selecting the correct 2.4GHz Wi-Fi network and entering the password for pairing.

Wi-Fi Pairing Troubleshooting

Wi-Fi Network Selection and Reset

Finalizing Heat Pump Pairing

Pairing Process and Device Addition

Heat Pump App Operation Screen