20
2.
The manual start handgrip has
been operated repeatedly with the
starter engaged.
The manual start handgrip has
been operated repeatedly with the
spark plug cap removed.
Insert the spark plug cap and try to start
the engine.
3. The cut grass is no longer
collected in the grass
catcher.
The cutting blade has hit a foreign
object.
Stop the engine and remove the spark
plug cap. Check for any damage and
Dealer (section Cutting blade).
The inner part of the chassis is
soiled.
Clean the internal part of the chassis
(par. Cleaning the cutting blade
assembly).
4.
The cutting blade is not in good
condition
Service Dealer for the sharpening or
replacement of the cutting blade.
5.
whilst working.
Damaged or loose parts
The bolt on the cutting blade is out
of place.
Stop the machine and disconnect the
Check for any damage or loose parts.
All checks, replacements or repairs
Authorised Service Dealer.
the cutting blade is damaged.
Stop the engine and remove the spark
Service Dealer (section Cutting blade).
Mulching kit (Figure 22.0)
Finely chops the cut grass and leaves it on the lawn.
Figure 22
To Next Page
Loading...
