Mountfield HP185 - KNOW YOUR MOWER; MACHINE COMPONENTS IDENTIFICATION; ASSEMBLY; UNPACKING AND PREPARATION

8
KNOW YOUR MOWER
Clutch Lever
(Lever-lower)

Pull Cord
& Guide
Operator Presence Control
(OPC) (Lever-upper)
Handle Securing
Knob
Grass Collector
Oil Filler Cap /
Dipstick
Cutter Deck
Spark Plug
Engine
Engine
Primer
The following safety precautions must be observed at all times. Please read them carefully.
ASSEMBLY
Certain components of the machine are not installed in the factory and have to be assembled after unpacking,
following the instructions below.
Unpacking and completing the assembly should be done on a at and stable surface, with enough
space for moving the machine and its packaging. Do not use the machine until all the instructions
provided in the “ASSEMBLY” section have been carried out.
Unpacking (Figure 3.0)
1. 
2. 
Figure 3
Fuel Filler Cap