Mountfield HP470 - Description of Controls

The blade brake is controlled by the lever (1), which
should be held against the handle when starting and using the
lawnmower. The engine stops when the lever is released.
In the power-driven models, pull the lever (1) towards the
handle for forward movement. The lawn-mower stops moving
forward when the lever is released.
The cutting height is adjusted using the levers (1).
The four wheels must be at the same height.
MAKE THIS ADJUSTMENT ONLY WHEN THE BLADE HAS
STOPPED MOVING.
2.3
2.2
2.1
2. DESCRIPTION OF CONTROLS
1
1
2.1
2.2
2.3
1
1