Mountfield Levita PW 100 User Manual (English)

Questions and Answers:

C
Christina SmithAug 1, 2025
How to fix a Mountfield Pressure Washer that refuses to start?
- L
  lcarterAug 1, 2025
  If your Mountfield Pressure Washer refuses to start, there are several potential causes. First, ensure the machine is properly plugged in. If it is, try a different socket to rule out a defective socket. Check the fuse and replace it if it has blown. Lastly, try using the pressure washer without an extension cord to eliminate a defective extension cord as the cause. Plug in machine. Try another socket. Replace fuse. Try without the extension cord.
S
Sheena JohnsonAug 5, 2025
What to do if my Mountfield Pressure Washer suddenly stops?
- M
  mayersAug 5, 2025
  If your Mountfield Pressure Washer stops working, several issues could be the cause. A blown fuse could be the reason, so replace it. Ensure that the mains voltage corresponds to the specification on the model tag. The thermal sensor might have activated; leave the washer for 5 minutes to cool down. Additionally, a partially blocked nozzle can cause the machine to stop, so clean the nozzle. Replace fuse. Check that the mains voltage corresponds to specification on the model tag. Leave the washer for 5 minutes to cool down. Clean the nozzle
V
Vincent MooreAug 10, 2025
Why is my Mountfield Levita PW 100 pulsating?
- L
  Luke RosarioAug 10, 2025
  If your Mountfield Pressure Washer is pulsating, there could be several reasons. Air in the inlet hose might be the problem; allow the machine to run with the trigger open until regular working pressure resumes. Ensure an adequate supply of mains water, avoiding long, thin hoses. A partially blocked nozzle can cause pulsation, so clean it. Also, check and clean the water filter if it's blocked. Finally, straighten out any kinks in the hose. Allow machine to run with open trigger until regular working pressure resumes. Check that the water supply corresponds to specifications required NB! Avoid using long, thin hoses (min. 1/2\"). Clean the nozzle. Clean the filter. Straighten out hose.
S
Sandy BraunAug 14, 2025
What to do if Mountfield Levita PW 100 Pressure Washer starts but no water comes out?
- M
  Marilyn PughAug 15, 2025
  If your Mountfield Pressure Washer starts but no water comes out, several issues could be the cause. First, check if the pump, hoses, or any accessory are frozen; if so, wait for them to thaw. Ensure that the inlet water is connected. A blocked water filter or nozzle can also prevent water flow, so clean both the filter and the nozzle. Wait for pump/hoses or accessory to thaw. Connect inlet water. Clean the filter. Clean the nozzle.
A
angelica76Aug 18, 2025
How to troubleshoot fluctuating pressure in my Mountfield Pressure Washer?
- M
  Michael RussellAug 18, 2025
  If you're experiencing fluctuating pressure with your Mountfield Pressure Washer, it might be due to the pump sucking air; check that hoses and connections are airtight. Dirty, worn-out, or stuck valves can also cause this issue; clean and replace them if necessary, or refer to your local distributor. Additionally, worn-out pump seals could be the culprit; clean and replace them, or consult your local distributor. Check that hoses and connections are airtight. Clean and replace or refer to local distributor. Clean and replace or refer to local distributor
T
Todd RiceAug 23, 2025
Why does the fuse keep blowing on my Mountfield Pressure Washer?
- B
  Billy StewartAug 23, 2025
  If the fuse blows in your Mountfield Pressure Washer, it may be because the fuse is too small. Change to an installation higher than the amp consumption of the machine. You might also try using it without the extension cord. Change to an installation higher than the amp. consumption of the machine. You may try without the extension cord.
J
Jennifer BurnsAug 27, 2025
Why does my Mountfield Levita PW 100 Pressure Washer start and stop on its own?
- L
  Leslie TurnerAug 27, 2025
  If your Mountfield Pressure Washer often starts and stops by itself, it could be due to a leak in the pump or spray gun. Contact your nearest service for assistance. Contact your nearest Service