Mountfield PATRIOT UB0900 User Manual

37 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

1

UB0900

ÚHLOVÁ BRUSKA

NÁVOD K POUŽITÍ

UHLOVÁ BRÚSKA

NÁVOD NA POUŽITIE

ANGLE GRINDER

USERS MANUAL

Pozor: Před použitím nářadí si pozorně přečtěte tento návod k použití!

Pozor: Pred použitím tohto náradia si pozorne prečítajte tento návod na použitie!

Warning: Read carefully operating instructions before using this tool!

Mountfield a.s., Mirošovická 697

CZ-25164 Mnichovice

03/2021 – No.723D

Questions and Answers:

W
William ClarkAug 4, 2025
Why are the vibrations too strong on my Mountfield PATRIOT UB0900?
- R
  rbakerAug 4, 2025
  If your Mountfield Grinder's vibrations are excessively strong, it could be due to several reasons. First, check all screws and parts of the machine to ensure they are properly tightened. Another potential cause is that the grinding or cutting wheel may be loose or not clamped correctly; in this case, you should check and refit the wheel properly. Lastly, inspect the grinding or cutting wheel for any damage and replace it if necessary.
D
Darius PopeAug 19, 2025
What to do if the motor overheated on my Mountfield Grinder?
- A
  Angela WarrenAug 19, 2025
  If your Mountfield Grinder motor overheats, it's likely due to overloading caused by applying excessive pressure during grinding or cutting. To resolve this, allow the motor to cool down by running the tool idle for about 3 minutes.

Mountfield PATRIOT UB0900 Specifications

General

Brand	Mountfield
Model	PATRIOT UB0900
Category	Grinder
Language	English

Summary

Introduction

Proper Use

Controls and Accessories

Safety Symbols Used

Safety Instructions

Work Area Safety

General safety rules for the work environment.

Electrical Safety

Safety precautions related to electricity and power tools.

Personal Safety

Guidelines for operator safety and personal protection.

Power Tool Use and Care

Proper usage, maintenance, and care of the power tool.

Service

Information on professional servicing and repairs for the power tool.

Additional Safety Rules for Angle Grinder

Kickback and Related Warnings

Specific warnings and precautions related to tool kickback.

Kickback Prevention Techniques

How to maintain grip, body position, and avoid situations causing kickback.

Cutting-Off Operation Safety

Specific safety instructions for abrasive cutting-off operations.

Wheel Mounting and Usage

Guidelines for selecting, mounting, and using wheels safely.

Setting Up

Attaching the Handle

Instructions for attaching and securing the auxiliary handle.

Protective Guard Mounting

Steps for correctly mounting and adjusting the protective guard.

Wheel Information and Mounting

Details on wheel types, specifications, and mounting procedures.

Operation

Personal Protective Equipment

Recommended PPE for operating the angle grinder safely.

Switching On and Off

Procedures for safely switching the angle grinder on and off.

Working with the Grinder

Guidelines for operating the grinder on the workpiece.

Grinding and Cutting Operations

Techniques for grinding, roughing, and separating operations.

Material-Specific Tips

Advice for working with various materials like metal and soft metals.

Care, Maintenance, and Storage

Maintenance-Free Operation

General statement about the tool's low maintenance requirements.

Cleaning

Instructions for cleaning the power tool after use.

Storage

Guidelines for storing the tool safely.

Troubleshooting

Technical Data

Noise and Vibration Values

Declared noise and vibration emission values for the tool.

Disposal

Warranty

EU Declaration of Conformity