Mountz MDC-26 - Page 38

Seating point (%) 10-90 207 Auto
Torque rising rate(ms) 50-200 208 50
Ramp up speed(rpm) 20-80% of max 209 Auto
Torque compensation (%) 90-110 210 100
15
TC/AM_AC/TM 211 0
Torque 212 Auto
Torque min/max (%) 213 0
Target angle(degree) 214 0
Min angle(degree) 215 0
Max angle(degree) 216 0
Snug torque(%) 217 0
Speed (rpm) 218 Auto
Free fastening angle(degree) 219 0
Free fastening speed(rpm) 220 0
Soft start(1-300ms) 221 0
Seating point (%) 10-90 222 Auto
Torque rising rate(ms) 50-200 223 50
Ramp up speed(rpm) 20-80% of max 224 Auto
Torque compensation (%) 90-110 225 100
I/O
I/O (IN)
Inpu
t #1 226 1
Input #2 227 2
Input #3 228 3
Input #4 229 4
Input #5 230 5
Input #6 231 6
Input #7 232 7
Input #8 233 8
I/O (OUT)
Output #1 234 1
Output #2 235 2
Output #3 236 3
Output #4 237 4
Output #5 238 5
Output #6 239 6
Output #7 240 7
Output #8 241 8
mountztorque.com - 1080 N 11th St, San Jose CA 95112 - 408.292.2214
38