Need help?Do you have a question about the Movacolor MC-TC and is the answer not in the manual?
General| Brand | Movacolor |
|---|---|
| Model | MC-TC |
| Category | Control Systems |
| Language | English |
Essential safety precautions for operating and maintaining the equipment.
Explains the MC-TC touchscreen, LEDs, and ports for user interaction.
Guides through the initial startup sequence and user level login process.
Covers global system settings including language, production mode, and network.
Details the types of input signals for controlling the unit.
Explains different input signal types and connections.
Enables or disables recipe functionality for storing settings.
Allows storing and recalling complete production settings as recipes.
Instructions for loading, editing, and saving recipes.
Identifies and describes the main physical components of the MCBalance Powder unit.
Explains the powder metering principle and system capacities.
Covers the physical installation of the MCBalance unit.
Details the electrical connections for the controller and unit.
Step-by-step guide for performing initial and regular load cell calibration.
Configuration settings for the MCBalance Powder unit, including hopper levels.
Details production settings, control modes, and tolerance parameters.
Explains how alarms and warnings are indicated, reset, and their impact.
Guides on configuring programmable outputs as alarms or warnings.
How to access and review the history of occurred alarms.
Details specific warning codes and their troubleshooting steps.
Details specific alarm codes and their troubleshooting steps.
Addresses issues with dosing system specification or maximum deviation alarms.
Addresses causes for a slow dosing system performance.
Addresses problems with the unit not recognizing input/start signals.
Addresses causes for unstable hopper weight readings.
To Next Page