2
MOVE SINGLE - Installation guide
1. Desk clamp (1PC)
2. Anti-slip mat (1PC)
3. Anti-slip ring (1PC)
4. Grommet support (1PC)
5. Anti-slip pad (2PCS)
6. Grommet support-washer (1PC)
7. Screw (1PC)
8. Butterfly nut (1PC)
Tool required
1.Desk clamp(1PC)
2.Anti-slip mat (1PC)
3.Anti-slip ring (1PC)
4.Grommet support(1PC)
5.Anti-slip pad (2PCS)
6.Grommet support-washer(1PC)
7.Screw(1PC)
8.Butterfly nut(1PC)
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting
installation.If you are unsure of any part of this installation,please contact a professional installer
for assistance.
● The desk or mounting surface must be capable of supporting the combined weight of the mount
and the display,otherwise the structure must be reinforced.
● Please c
heck joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the mount will support the combined load of the
equipment and hardware. Never exceed the maximum load capacity 9 KG,or else it may result in product failure or personal
injury.
No te : this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
CAUTION
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Waste disposal
Item No.:DLB902-UK175
Installation guide
1.Desk clamp(1PC)
2.Anti-slip mat (1PC)
3.Anti-slip ring (1PC)
4.Grommet support(1PC)
5.Anti-slip pad (2PCS)
6.Grommet support-washer(1PC)
7.Screw(1PC)
8.Butterfly nut(1PC)
This product contains small items that could be a choking hazard if swallowed.Keep these items away from young children.
● Make Sure these instructions are read and completely understood before attempting
installation.If you are unsure of any part of this installation,please contact a professional installer
for assistance.
● The desk or mounting surface must be capable of supporting the combined weight of the mount
and the display,otherwise the structure must be reinforced.
● Please c
heck joint parts every two months,making sure the screws are loosened or not.
This product was designed to be installed on desk. Before installing, make sure the mount will support the combined load of the
equipment and hardware. Never exceed the maximum load capacity 9 KG,or else it may result in product failure or personal
injury.
Note: this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
CAUTION
This marking indicates that this product should not
be disposed with other household wastes. To
prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Waste disposal
Item No.:DLB902-UK175
Installation guide
1
2
3
4
5
6
7
8
To Next Page
Loading...