40
7
MAINTENANCE
CHECK
DAILY
WEEKLY MONTHLY
WHEN NEEDED
SCREW
Re-tighten the screws if
they are loose.
CLEANING
Always clean the
equipment before AND
after each workout.
PULLEYS
Check that the pulleys
are not damaged or
worn.
LOCK PIN
Check that the pins are
not damaged or worn.
TENSIONER
Check that the steel cables
are properly divided.
tensioned as described
in the manual.
LOAD MULTIPLIER
Verify that the load
multiplier is not
damaged or worn.
Any queries can be made about damages to the customer service center, by calling 0800-7724080. To find an Authorized dealer go to
http://movement.com.br/assistencia-tecnica and allow the browser to access your location and facilitate to a nearest authorized person.
MAINTENANCE PANEL EQUIPMENT
Use the following table to know the periodicity of maintenance.
STEEL CABLE
Check all steel cables for
damage or cracks.
SELECTOR PIN
Check if the selector pin
is broken or damaged.
FAIRING
Check that the fairing is
not damaged or broken.
COUNTER
Make counter
battery replacement
UPHOLSTERY
Make the upholstery
replacement if it is torn.
ADJUSTMENTS
Check if the settings are
working perfectly
To Next Page
Loading...
