MOVETEC MCP-TDH6 - Power Saving Function; Adjusting the Height

MCP-TDH6 User Guide
Version : E
Release Date : 08/16/2017
P. 4
Power Saving Function - Waking up the Control
◼ When no button has been pressed for 10 seconds, display goes off. Press any button to light up
the display again.
◼ When no button has been pressed for 30 seconds, the system goes to <0.1W standby mode. Long
press any button to wake the system up. Display shows desk height again.
Adjusting the Height
◼ Press ▲or ▼ to adjust the height.