Reset
◼ Simultaneously press ▲ and ▼ for 3 seconds. Continue pressing the buttons until both
columns are in lowest position. When finish reset, the control box makes a beep and the buttons
can be released.
◼
When conducting reset, the display shows “000” in last 100mm stroke. When finish reset, the
display shows starting height again.
◼ If releasing ▲ and ▼ buttons before the display shows “000”, the desk goes back to
normal operation. If releasing ▲ and ▼ buttons after the display shows “000”, the user
has to finish the reset to go back to normal operation.
◼
Reset is necessary at first operation of the desk and when the desk legs aren’t moving
synchronously.
To Next Page
Loading...
Need help?
General