Need help?Do you have a question about the Moviecam COMPACT Mk2 and is the answer not in the manual?
Legal notices regarding copyright and liability for the document.
Introduction to the camera, its history, and upgrades.
Guidelines for camera maintenance and safe operation.
General notes and specifications for the camera.
Details about the camera's front panel and connectors.
Describes components and connectors on the camera's left side.
Explains rear panel connectors, main switch, and magazine mounting.
Covers accessory connectors, carrying handle attachments, and handgrip mounting.
Details top plate, format adjustment, and base plate.
Details the Mk2 Optical Viewfinder, its features, and capabilities.
Covers viewing filter, arm rotation, extension, and swiveling.
Mounting, diopter correction, and heater for the eyepiece.
Details the video-only viewfinder and its direct camera mounting.
Introduces and explains LCD and Mask MOVIELITE modules.
Covers mask exchange, alignment, and brightness adjustments.
Details the READOUT Unit, its displays, and mounting.
Information on the Remote Control Box and its connectivity.
Overview of system components, mounting, and basic operation.
Selecting video output signals and cable connections.
Synchronization methods and CCD adjustments.
Explains OSD, menu navigation, and display functions.
Instructions for mounting the Top Mount Adapter.
Details latch mechanisms for securing magazines.
Instructions for attaching the Rear Mount Adapter.
Information on using the camera cover cap instead of a magazine.
Lists magazine types and cleaning procedures.
Details light trap, label holder, and magazine latches.
Instructions for using the core holder and loading film.
Explains manual/digital counters and tightening wheels.
Introduces various handles and handgrips for ergonomic handling.
Describes the side handle's tilting device and positioning.
Mounting rear handle and extending handgrip position.
Ergonomic use of right and left handgrips.
Attaching and using the padded shoulder rest.
Explains interior components and movement block installation.
Adjusting movement for film transport using specific screws.
Details aperture plates, film gates, and available formats.
Procedures for mounting/removing aperture and pressure plates.
Explains the power supply unit, its connections, and charging.
Details the battery block and connecting camera power.
Explains the DC-DC converter's role in stabilizing voltage.
Step-by-step guide for threading film into the camera.
Moving film loop, adjusting loop length, and checking transport.
Procedures for closing the camera door and performing dust checks.
Explains the camera control board, displays, and LEDs.
Covers speed control, synchronization methods, and frame rates.
Details AATONCODE and AATONCODER MK-4 operations.
Mounting and using the assistant work light.
Lists various tools and their uses for camera operation.
Diagrams of various connectors and the directors finder.
To Next Page
General