Need help?Do you have a question about the MOVING INTELLIGENCE PHANTOM Vanguard Caravan Alarm and is the answer not in the manual?
Arm the alarm by pressing the arm button. Confirmed by beeps and dome light illumination for 30 seconds.
Disarm the system by pressing the disarm button. Confirmed by three beeps and dome light illumination.
Arm the system using button 3 to exclude wireless PIR sensors. Confirmed by a single beep.
Exclude the tilt sensor for a single arming cycle by pressing button 3 after initial arming confirmation.
Arming/disarming activates the awning light for 30 seconds. Button 4 activates it for 5 minutes.
Customise tilt sensor sensitivity levels (3.5°, 7°, 14°) via remote control button presses.
An alarm triggers the siren for up to 30 seconds, with a maximum of 8 cycles per condition.
Identifies the cause of the last trigger via specific beep patterns upon disarming.
Add new remotes or sensors via the LEARN button sequence, confirmed by beeps.
Replace remote CR2032 batteries when LED flickers. Replace PIR batteries when a 'bop' sound occurs.
General| Brand | MOVING INTELLIGENCE |
|---|---|
| Model | PHANTOM Vanguard Caravan Alarm |
| Category | Security System |
| Language | English |
To Next Page