The MOZSLY Watch Winder is a device designed to keep automatic watches fully wound, eliminating the need for manual rewinding and resetting. It is a premium product from MOZSLY, a leading manufacturer and retailer of watch winders and watch boxes, known for its high-quality construction and quiet operation.

Function Description:

Automatic watches rely on the wearer's wrist movements to keep their mainspring wound. When a watch is not worn for an extended period, its movement will stop, requiring manual winding and resetting of time and date. The MOZSLY Watch Winder simulates these wrist movements by rotating the watch, ensuring it remains wound and accurate. This is particularly beneficial for owners of multiple automatic watches or those who frequently remove their watches, such as during travel, as it keeps the watches in a ready-to-wear condition.

The winder employs a solid-state micro-processor to control a D/C motor, which intermittently drives a rotating compartment. This compartment holds a soft watch pillow, ensuring maximum protection for the watch during rotation. The winder offers three directions of rotation: clockwise, counter-clockwise, and alternating directions (which means it will turn clockwise and counter-clockwise alternatively and automatically).

Important Technical Specifications:

Power Supply: The winder can be powered by either an AC adapter or two AA 1.5V alkaline batteries. It's crucial to note that both power sources cannot be used simultaneously. If using battery power, the AC adapter must be unplugged. If using AC power, the batteries must be removed.
Battery Life: Fresh alkaline AA batteries can power the winder for approximately 40-50 days if it's turned on continuously.
Watch Compatibility: The winder is suitable for mechanical watches with a maximum strap circumference of 21cm when buckled, and a dial diameter of up to 55mm.
Rotation Programs (TPD - Turns Per Day): The MOZSLY watch winder offers four distinct winding programs, each with a specific TPD and rotation schedule:
- Mode I (650 TPD): Rotates for 3 minutes 28 seconds, then rests for 56 minutes 32 seconds. This cycle repeats hourly.
- Mode II (900 TPD): Rotates for 4 minutes 48 seconds, then rests for 55 minutes 12 seconds. This cycle repeats hourly.
- Mode III (1200 TPD): Rotates for 6 minutes 28 seconds, then rests for 53 minutes 32 seconds. This cycle repeats hourly.
- Mode IV (1500 TPD): Rotates for 8 minutes 08 seconds, then rests for 51 minutes 52 seconds. This cycle repeats hourly.
- The TPD and direction required for each watch can vary, and users are advised to consult their watch manufacturer's website for specific recommendations.
Rotation Direction Settings: The mode switch allows selection of clockwise, counter-clockwise, or alternating (C&CC) rotation. In alternating mode, the winder will run clockwise for one hour, rest, then run counter-clockwise for one hour, rest, completing a two-hour cycle.
Bridge Cable: A supplied bridge cable allows multiple MOZSLY watch winders to be connected and run from a single power source, reducing the need for multiple AC adapters.

Usage Features:

Easy Installation: Plug the AC adapter into a wall socket and the DC plug hole on the back of the winder.
Master Power Switch: A master power switch on the back controls the unit. For multi-motor units, each motor also has its own on/off switch.
Watch Pillow: The watch pillow is designed to be squeezed and inserted into the winder with the watch already buckled on it.
Automatic Daily Repeat Feature: Once a program is selected and the main power switch is left ON, the winder will automatically start again at approximately the same time each day, ensuring continuous winding.
Quiet Operation: MOZSLY winders are noted for having quiet running modes.
Premium Materials: The interior of each watch winder is made of premium synthetic PU leather, and the exterior often features a glossy piano-style finish.

Maintenance Features:

Battery Care:
- Use two fresh AA 1.5V alkaline batteries.
- Insert batteries with correct polarity.
- Do not mix new and used batteries.
- Do not mix batteries of different types.
- Remove exhausted batteries from the product.
Cleaning: If cleaning the unit with liquid cleaners or a wet cloth, the electrical supply must be disconnected.
General Safeguards:
- Use only the provided AC adapter and appropriate voltage.
- Do not remove screws from the power adapter or winder unit, as there are no user-serviceable parts inside.
- Disconnect the adapter from the wall outlet for complete power shut-off.
- Do not allow children to play with the product.
- Do not expose the system to rain, moisture, direct sun-rays, or sources of heat.
- Avoid placing the winder near sources of magnetism (e.g., TV-sets, monitors, loudspeakers).
- Keep the original packaging for safe shipping if the unit requires service.
- Never insert or remove a watch while the winder is rotating; ensure the power is off to prevent motor damage.
- When putting in or taking out the watch, fix the roller by hand and do not rotate it to prevent motor rotation and potential damage.

The MOZSLY Watch Winder is a sophisticated and essential accessory for automatic watch enthusiasts, offering convenience, protection, and optimal time-keeping for valuable timepieces.

MOZSLY Watch Winder - Table of Contents

Table of Contents