Batteryless Jump Starter M+S BOOSTER – 400A – LED
WE ARE THE GOOD GUYS
4 5
5. Fault Indications
If the appliance does not work, check the following points:
• Can the appliance be charged by one of the three charging connections (Battery
terminal clamps, 12 V charging cable or micro USB-cable)?
• Is the connected battery faulty or deep-discharged?
• Has the appliance been connected with correct polarity?
6. Cleaning
• Before cleaning, disconnect the appliance from battery or if necessary from exter-
nal charging cables.
• Clean the housing only with a moist cloth and then wipe it dry. Solvents like thin-
ners and petrol as well as abrasive products destroy the surface, the printing and
the display.
• Prevent penetration of cleaners into the inside of the appliance.
7. Packaging/Environment protection
• When disposing of the packaging, please follow the applicable laws for environ-
ment protection and trash disposal.
• Disposal of the outer packaging with the normal domestic trash or paper recyc-
ling is permitted.
8 Recycling Information
• According to the electrical and electronic appliances law, owners of electrical
appliances are legally obliged to take old electrical and electronic appliances to a
separate waste collection facility. Help along and make a contribution to environ-
ment protection by bringing used appliances to a collection center of your com-
munal disposal agency (e.g. materials yard) or to any dealer who sells electronic
devices and who has more than 400 m² sales area. Collection is free of cost.
• Disposal with the normal household trash is prohibited.
• The symbol alongside means that the appliance must be disposed separately from
the normal household trash.
SCOPE OF SUPPLY
Delivery includes:
1x M+S Booster with battery terminal clamps
1x Charging cable for 12 V socket
1x User manual
TECHNICAL DESCRIPTION
1 Voltage indicator Indicates battery or M+S Booster voltage
2 Condition indicator Indicates all M+S Booster conditions
3 Button Glow Starts glow function for starting diesel engines
4 Button ON/OFF Switches M+S Booster ON/OFF or activates Override-/
Bypass-Mode
5 Battery terminal clamps For connecting with battery terminals
6 Micro USB-socket For external charging the M+S Booster via USB cable
7 12 V charging socket For external charging via charging cable and 12 V plug
8 Charging cable with 12 V
plug
For external charging the M+S Booster via 12 V socket
1
2
6
7
5
8
3
4