7
EN
In order to ensure your children‘s safety, please keep all packaging (plastic bags,
boxes, polystyrene etc.) out of their reach.
WARNING! Do not allow small children to play with the foil as there
is a danger of suffocation!
DESCRIPTION OF THE APPLIANCE
1. Blender body
2. On switch
3. “TURBO” button
4. Holder for hanging
5. Lock button
6. Stainless steel mixing attachment
7. Mounting attachment
8. Whisks for whipping cream and light sauces
- 2 pcs
9. Dough hooks for mixing dough - 2 pcs
INSTALLATION AND USE OF THE BLENDER
NOTE! Before first use clean all the attachments and contain-
ers that come in contact with food.
Attach one of the selected accessories to the
blender body (1): mixing attachment (6), mounting
attachment with whisks (8) and dough hooks (9).
The accessories lock automatically when pressed
against the blender body. To disconnect the select-
ed accessories hold the blender body and press two locking buttons (5) at the same time.
To avoid the risk of injury or damage take caution when disconnecting the accessories. To
properly assemble the blender along with whisks and dough hooks, proceed as follows: After
installing the attachment (7), place whisks (8) or dough hooks (9) in the corresponding slots
of the attachment (7), then push them home until they lock.
Insert the plug of the power cord to a power outlet.
To switch on the appliance, press and hold the switch (2) or (3).
TURBO FUNCTION
The TURBO function (3) is used for temporary operation at full speed. It works in pulses - only
when you press the button (3).
In this mode the appliance may be used up to 30 sec. After this time, switch off the appliance
and wait until it cools down.
NOTE! Make sure the mixing attachments are properly installed. Improperly installed attachments may fall
out during operation.
Whisks (8) are used, among other things, for beating egg yolks with sugar, preparing creams
and dough for omelets and pancakes.
4
2
1
5
7
896
3
To Next Page
Loading...
Need help?
General
