15
GB
APPLIANCE OVERVIEW
1
5
2
3 4
a b c e
ce
d
b a
ff
gg
hh
1. Left heating zone (max.1600 W,ø173
mm)
2. Right heating zone (max.1300 W,ø135
mm)
3. Left heating zone control panel
4. Right heating zone control panel
5. Anti-slip feet
CONTROL PANEL OVERVIEW
a. on/off switch
b. (+) range adjustment button
c. (-) range adjustment button
d. “Menu” function selection button
e. LED display
f. heating power control light
g. heating temperature control light
h. timer control light
GENERAL INFORMATION
1. The induction hob generates a strong magnetic field that induces eddy currents in the
bottom of the pan which produce heat. This means that only the pan is heated and not the
hob, which saves a lot of electrical energy and significantly reduces the cooking time.
2. Make sure to use a pan compatible with induction hobs. Do not use pans which have uneven
bottoms, support feet or a diameter smaller than 9 cm for the left plate or 11 cm for the right
plate. The maximum diameter is 24 cm for the left plate and 18 cm for the right plate. Do not
use glass, clay or aluminium pots.
4. The hob features two heating zones with a power of 1600 W and 1300 W, respectively. The
operation and programming instructions specified in the “USAGE INSTRUCTIONS” section
are the same for the two heating zones. The two zones can work independently.
5. Always keep the hob and the control panel clean. Use dry fingers and firm movements when
operating the keyboard.
6. The hob features and anti-overheating system. If the cooking temperature is too high or the
To Next Page
Loading...
Need help?
General
