16
EN
APPLIANCE OVERVIEW
1
3
2
g f e
h
c b a
4
3
d
1. Heating plate maximal power 1800W
2. Control panel
a. Touch button switch (ON/OFF)
b. Keep warm touch button
c. Temperature/power adjustment touch
button
d. Parameter adjustment touch buttons (-/+)
e. Milk heating touch button
f. BOOST touch button
g. Timer touch button
h. LED display
3. Ventilation openings
4. Anti-slip feet
GENERAL INFORMATION
1. The induction hob generates a strong magnetic eld that induces eddy currents in the bot-
tom of the pan which produce heat. This means that only the pan is heated and not the hob,
which saves a lot of electrical energy and signicantly reduces the cooking time.
2. Make sure to use a pan compatible with induction hobs. Do not use pans which have uneven
bottoms, support feet or a diameter smaller than 12 cm. The maximum diameter is 20 cm. Do
not use glass, clay or aluminium pots.
3. Always keep the hob and the control panel clean. Use dry ngers and rm movements when
operating the keyboard.
4. The hob features and anti-overheating system. If the cooking temperature is too high or the
pan is empty, the “E5” error will be reported. Once the appliance cools down, the cooking
process will resume.
5. The hob features an undervoltage and overvoltage protection system. If the voltage chang-
es too much, the appliance will report an error (see the error table).
BEFORE FIRST USE
1. Remove the appliance from the box. Remove all plastic sheets, bags and styrofoam inserts.
2. During unpacking check appliance if there are not damaged.
3. Clean the appliance (see CLEANING & MAINTENANCE).
4. Make sure that your mains power supply corresponds to the voltage stated on the rating
plate.