EasyManuals Logo

MPM MKW-08M User Manual

MPM MKW-08M
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
GB
1. Espresso machine housing
2. Control panel
a. power switch with LED
b. 1-cup button with LED
c. 2-cup button with LED
d. steam heating button with LED
3. Cup warmer
4. Steam dosage knob
5. Manometer
6. Filter baskets
a. small filter basket (10 g)
b. large filter basket (20 g)
7. Portafilter
8. Filter lock lever
9. Portafilter handle
10. Group head
11. Drip tray mounting space
12. Drip tray
13. Drip tray grate
14. Steam jet nozzle
15. Rubber nozzle handle
16. Nozzle guard
17. Water tank housing
18. 1.2 L water tank
19. Water tank cover
20. Non-slip feet
21. Coffee measuring spoon with tamper
ATTACHING/DETACHING THE FILTER WITH THE HOLDER
1. Choose a filter (6) and place it in the filter holder (7) (Fig. 1).
2. Place the portafilter (7) with a filter basket (6) inside the
group head (10) so that the portafilter handle (9) aligns with
the open lock symbol on the front panel of the espresso ma-
chine .
3. Gently turn the portafilter handle (9) to the right so that it
aligns with the closed lock symbol on the frontal panel of
the coffee maker (Fig. 2).
4. Detach the filter holder and the filter in the reverse order:
gently turn the filter holder handle (9) to the left to stop,
remove the filter holder (7) from the receptacle (10) and re-
move the filter from the holder.
CAUTION! Always hold the lter holder by the handle (9). The handle
features a latch lever (8) to keep the lter in the holder while shaking it
empty. The lter holder can be hot. Handle with care.
FILLING THE WATER TANK
1. Unplug the espresso machine from the mains.
2. Lift the water tank (18) by pulling up on the handle.
3. Open the water tank cover and pour in no more than 1.2 L
(bottom edge of the black tank handle) of cold drinking water, but in any case no less than
0.4 L.
4. Place the water tank back in the espresso machine. While reinserting the water tank make
sure that the two hooks on the water tank engage the two hinges in the back of the espresso
machine.
5. You can also fill the water tank without removing it — move water from a container. Be care-
ful not to spill water on the espresso machine. The espresso machine must be unplugged
Fig. 1
Fig. 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MPM MKW-08M and is the answer not in the manual?

MPM MKW-08M Specifications

General IconGeneral
BrandMPM
ModelMKW-08M
CategoryCoffee Maker
LanguageEnglish

Related product manuals