7
EN
APPLIANCE DESCRIPTION
2
3
4
5
1
7
8
1. Housing
2. Cover
3. ON/OFF
4. Cable
5. Rubber anti-slippery legs
6. The place for cable
7. Stainless steel grinding knife
8. Ty system against switching on without
lid
HOW TO USE THE UNIT
1. Before the use check whether the unit is unplugged.
2. Put the unit on a stable and dry surface.
3. Holding the casing (1) use the other hand in order to open the cover (2) twisting it counter-
clockwise and remove it.
4. Pour a doze of coffee grains (approx. 50g.)
5. Holding the casing (1) use the other hand in order put the cover (2) and block it twisting it
clockwise.
6. Plug the unit.
7. In order to operate the unit push and hold the main switch (3).
8. After the milling has been completed, unplug the unit, remove the cover, pour out the coffee
and clean the interior of the coffee mill.
NOTE! The engine’s performance time should not exceed 30 seconds. Than, the unit must have at least a one
minute pause. The unit is equipped with a protection against accidental start when the cover is fastened incor-
rectly. Interior of the mill must be cleaned regularly.
To Next Page
Loading...
