8
EN
CLEANING AND MAINTENANCE
1. The cover must be washed and dried manually.
2. Use a wet cloth to wipe clean the casing and dry it.
3. Do not use tearing agents to clean the unit since they might scratch it and damage.
TECHNICAL DATA:
Technical parameters are indicated on the product nameplate.
Length of power cord: 0.90 m
Maximum time of operation: KB
MAX
= 30 sec
ATTENTION! MPM reserves its rights to modify the technical data.
PROPER DISPOSAL OF THE PRODUCT (waste electrical and electronic equipment)
Poland
Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be handed-over to
a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points,
the user should contact the municipal point of electric waste collection or used equipment processing department.
To Next Page
Loading...
Need help?
General
