To Next Page

To Previous Page

APPLIANCE DESCRIPTION

1. Housing

2. Cover

3. ON/OFF

4. Cable

5. The place for cable

6. Stainless steel grinding knife

7. Ty system against switching

on without lid

HOW TO USE THE UNIT

1. Before the use check whether the

unit is unplugged.

2. Put the unit on a stable and dry

surface.

3. Holding the casing (1) with the

other hand remove the cover (2).

4. Pour a doze of coﬀee grains (ap-

prox. 40g.)

5. Holding the casing (1), with the other hand, put the cover (2).

6. Plug the unit.

7. In order to operate the unit push and hold the main switch (3).

8. After the milling has been completed, unplug the unit, remove the cover, pour out the coﬀee

and clean the interior of the coﬀee mill.

NOTE! The engine’s performance time should not exceed 30 seconds. Than, the unit must have at least a one

minute pause. The unit is equipped with a protection against accidental start when the cover is fastened incor-

rectly. Interior of the mill must be cleaned regularly.

Other manuals for MPM MMK-07

Questions and Answers:

Need help?

Do you have a question about the MPM MMK-07 and is the answer not in the manual?

General