11
GB
Keep your children safe: do not leave any parts of the pack aging readily accessible
(i.e. plastic bags, cardboard boxes, polystyrene inserts, etc.).
WARNING! Never let children play with plastic film or bags. Choking/
asphyxiation hazard!
DESCRIPTION OF THE APPLIANCE
1. Tilt motor head
2. Speed control
3. Drive shaft with bolt (attachments
assembly point)
4. Stainless steel bowl with a volume
of 4,2L
4a. Additional bowl base a
capacity 4,2L
5. Motor head lock
6. Bowl-locking base
7. Splash guard with feeder
8. Mixer arm
9. Rod
10. Dough hook
11. Spatula
PREPARATION FOR OPERATION
ASSEMBLY/DISASSEMBLY OF THE MIXING BOWL
1. Ensure that the speed control (2) is in The “Off” position (“0” position).
2. Unplug the mixer from the power grid or disconnect the power supply.
3. Unlock the motor head (1) with the button (5) and tilt it back.
4. Place the mixing bowl (4) or (4a) in the bowl-locking base (6) and turn it clockwise
5. To disassembly the mixing bowl (4) or (4a) repeat operations 1-3 and turn the mixing bowl
anticlockwise.
WARNING! Unplug the mixer from the socket before any contact with the attachments!
ASSEMBLY/DISASSEMBLY OF MIXER ARM, ROD OR DOUGH HOOK
1. Ensure that the speed control (2) is in turn-off position (“0” position).
2. Unplug the mixer from the power grid or disconnect the power supply.
3. Unlock the motor head (1) with the button (5) and tilt it back.
4. Put any of the attachments (8, 9, 10) onto the drive shaft bolt (3) and push it upwards as
firmly as possible.
5. Turn the installed attachment anticlockwise, hooking it on the drive shaft bolt.
6. To disassembly the installed attachment repeat operations 1-3, push the installed attach-
ment upwards as firmly as possible and turn it clockwise.
7. The attachment can now be removed from the drive shaft bolt (3).
LOCKING/UNLOCKING THE MOTOR HEAD IN OPERATION POSITION
1. Ensure that the motor head (1) is in fully lowered position which enables the motor head
lock (5).
2. To unlock the motor head (1) press the motor head lock button (5). This will release the
locking mechanism and allow to raise the motor head freely (1).
To Next Page
Loading...
Need help?
General
