Why does my MPM MOD-25 Vacuum Cleaner have low suction power?
If your MPM Vacuum Cleaner has low suction power, the air filters might be very dirty, so you should clean or replace them. Also, the dust canister could be full, so you should empty it. Another cause might be that the suction hose and/or the telescopic wand is clogged, so unclog them.
What to do if my MPM Vacuum Cleaner canister is overheating?
If the canister of your MPM Vacuum Cleaner is overheating considerably, immediately turn it off and wait until it cools down.
How to fix cyclone chamber if it cannot be placed in its seat in MPM MOD-25 Vacuum Cleaner?
If the cyclone chamber with the dust canister of your MPM Vacuum Cleaner cannot be placed in their seat, the motor filters were not properly installed. Install the motor filters properly.
What to do if the cyclone chamber of my MPM Vacuum Cleaner cannot be placed in its seat?
If the cyclone chamber with the dust canister of your MPM Vacuum Cleaner cannot be placed in their seat, it may be because the motor filters were not properly installed. Ensure that you install the motor filters correctly.
General| Brand | MPM |
|---|---|
| Model | MOD-25 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
