FINISHING THE WORK
1. Disconnect the power cord from the mains.
2. Wait until the iron and the soleplate cool down.
3. Empty the water tank (1).
4. The device’s base is designed to hold the power cord and the connecting hose in a special
compartment.
5. Fold the connecting hose in half and wind clockwise.
6. Wind the power cord anti-clockwise around the base and then block the plug between the
power cord and the connecting hose.
TECHNICAL DATA:
Technical specifications are given on the product nameplate.
Length of mains cable: 1.8 m
Connecting hose length: 1.55 m
PROPER DISPOSAL OF THE PRODUCT (waste electrical and electronic equipment)
Poland
Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be handed-
over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection
points, the user should contact the municipal point of electric waste collection or used equipment processing department.
14
EN
To Next Page
Loading...
Need help?
General
