MPP Solar PCM4048 User Manual

Table of Contents
IMPORTANT NOTES ....................................................................................... 2
    
      
    
        
      
    
2.1.1Enter into Setting Mode ................................................................................. 11
2.1.2Battery Capacity(AH) Setting ......................................................................... 12
2.1.3Battery Voltage Setting ................................................................................. 12
2.1.4 Battery Over-voltage Limit Setting ................................................................ 13
2.1.5 Battery Under-Voltage Limit Setting ............................................................. 14
2.1.6 Pulse Charge Setting ..................................................................................... 14
2.1.7 Parallel Address Setting ................................................................................ 15
2.1.8 Total Input Power(KWH)Setting: ................................................................... 15
2.1.9 Parameters Displayed ................................................................................... 16
        
      
      

MPP Solar PCM4048 Specifications

General

Rated Power	4000W
DC Input	48V
Max PV Array Power	4000W
Max. PV Array Open Circuit Voltage	145VDC
Max Charging Current	80A
Max. AC Charging Current	60A
AC Output	230VAC ±5%
MPPT Range @ Operating Voltage	60-115VDC
AC Input Frequency	50Hz
Efficiency	93%
Operating Temperature	0°C to 55°C
Protection Features	Overload, Over temperature, Short circuit
AC Input Voltage	230VAC

Summary

Important Notes

1.0 Introduction

1.1 Installation Site

Details the required environmental conditions and location for safe installation.

1.2 Installation

Explains the electrical installation process, including voltage requirements and cabling.

1.3 Accessories

Lists and describes the included accessories provided with the solar charger unit.

1.4 LED Indication Explanations

Explains the function and meaning of the various LED indicators on the charger.

2.0 LCD Description

2.1 Operation

Covers charger operation, LCD status, and detailed settings like battery configuration and charging modes.

2.2 LCD Display Explanations

Provides a detailed breakdown of symbols and data shown on the LCD screen.

2.3 Error Codes

Lists and explains error codes displayed by the charger and troubleshooting steps.

3.0 Product Specifications