mPTech myPhone Tango LTE - Appearance of the Phone, Its Functions and Buttons

EN © mPTech. All rights reserved. TANGO LTE
16
• Charger output parameters: 5.0V 0.5A, 2.5W
• Average efficiency during operation (for 230V, 50hz): 72.83%
• Energy consumption in no-load condition: less than 0.3W
• Phone dimensions: 106.8 x 53.3 x 19.8mm
• Phone weight: 109g
Appearance of the phone, its functions and buttons
1
Camera
Camera lens.
2
Speaker
A speaker used in phone conversations.
3
Display
External LCD display 1.77".
4
Display
Main LCD display 2.4".
5
SOS button
Press and hold to activate alarm.
6
Headphone jack
Used to plug earphone (also: used as an antenna
while listening to FM radio).
7
<Menu>/<OK> button
While on the main screen enables entering into
the Menu.
While in the menu confirms chosen options.
8
<Contacts>/[Back]
button
While on the main screen enables entering into
the phonebook [Contacts]. While in the menu
you can exit or opt out.
9
Buttons <Up>,
<Down>, <Left>,
<Right>, and <OK>
While in menu enables navigating around the
menu. On the main screen <Up> -radio, <Down>
- contacts, <Right> - shortcuts, <Lift> - alarm,
<OK> - Confirmation and camera shutter button.
10
<Red handset>
button
Allows you to reject an incoming call.
While in the menu allows you to return to the
main screen.
While in the standby mode it allows to turn off
the display and, if pressed longer, turn it off or
on again.
11
<Green headset>
button
Allows you to receive an incoming call.
In the standby mode allows to view the call list.
12
<Radio> button
On the main screen it switches on the radio.
13
USB-C port
When connected, the charger enables recharging
the battery.
14
<Messages> button
On the main screen it switches on messages
menu.
15
<Camera> button
On the main screen it switches on the camera.
16
Phone keypad
Buttons enabling dialling the phone number in