EN © mPTech 2020. All Rights Reserved myPhone UP
21
downwards. Insert the battery so that its gold contacts touch the
tripple connector in the phone bay. Put on and gently press down
the cover until you hear the click of the latches. Make sure the
cover is well attached.
Charging the battery
Plug in the USB-C cable to USB-C connector in the phone then
connect USB connector to the adapter and to power grid.
*CAUTION: Improper connection of the charger can cause serious
damage to the phone. Damages caused by an improper use of the
phone are not covered by the warranty.
During charging, the battery icon in the upper right corner of the
screen should be animated. When charged, the battery icon will
no longer be animated and then disconnect the charger from the
wall outlet. Unplug the cable from the socket on the phone.
Emergency change of language
To set the user’s language, if someone accidentally chose an
unknown language, press the [Menu] > Down > Right > OK>
<2xDown> > <OK> > <2xDown> > <OK> when the main screen is
active, a następnie wybrać żądany język Menu.
Factory settings
To restore the factory settings, select in the phone Menu:
[Settings] > [Restore Factory Defaults]. The code for resetting to
factory settings is: 1122.
Troubleshooting
To Next Page
Loading...
Need help?
General
